Invatati sa cititi mesajele sistemului Linux, aratate de comanda dmesg. Folositi caietul de laborator lectia 1 si ascultati raspunsurile si indicatiile de lucru.
Adica dumpingul mesajelor sistemului dvs.
1) Ce distributie este folosita ? R: Ubuntu. 18.04.
2) Cata memorie are laptopul ? cautati, unele nuclee nu scriu. 8GBytes.
Memory: 7881164K/8162280K available (14339K kernel code, 2379K rwdata, 4928K rodata, 2704K init, 5020K bss, 281116K reserved, 0K cma-reserved)
3) DMA foloseste. da,
4) ACPI ce inseamana ? Power interface, tehnologie pt control al consumului.Dar APIC ?
5) Cate procesoare am ? 4 procesoare. Obs: hypertrading.
6) Frecv procesoarelor ? 2.5 Ghz
7) Se numeste ?
smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
8) Memorie cache ? Vezi caiet pg 3.
64 Kbiti pt cache de instructiuni si tot atat la cache de date.
9) APM = ? "Advanced" Power Interface = "bunicul" ACPI -ului.
Computerele cu sisteme ACPI nu mai au APM , care nu mai e de mult "advanced."
10) Intreruperea folosita de tastatura ? R: 1
serio: i8042 KBD port at 0x60,0x64 irq 1
11) Dar mouse-ul de la portul AUX ?
12) Modul UDMA cu care e compatibila interfata hardul ATA/SATA ? Ce aflati despre UDMA ?
Compatibil UDMA - invechit.
Permite HDD cu SATA 1. Permite SSD -SATA 3 (nu doi).
[ 1.306937] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.307628] ata1: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333100 irq 126
[ 1.307630] ata2: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333180 irq 126
[ 1.623931] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.951990] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Concluzie: A meritat sa pun un SSDin loc de HDD.
Sunt computere care au si NVME si SATA - pt unitate suplimentare de stocare.
13) Ce firma a produs HDD / SSD -ul ? Cautati ata1.
ata1.00: ATA-11: Patriot Burst, SBFM61.3, max UDMA/133
Cool : ii vad partitiile !
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
14) Irq-ul primei interfete ... depasita. In trecut : irq14.
Curios ca imi arata:
[ 1.307628] ata1: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333100 irq 126
[ 1.307630] ata2: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333180 irq 126
De citit (opt). https://askubuntu.com/questions/1243840/ubuntu-20-04-high-load-on-cpu-because-of-irq-126
15) Periferice similare HDD ? Cuplate pe interfete similare ?
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
16) Istorie: irq 15. Linux permite sa investighezi tabela de intreruperi.
Au ramas intrebarile 17 - 26.
Nota: Aceste scurte note explicative ramase nu pe tabla ci pe blog, nu tin locul participarii la laborator !
Resursa:
[ 0.000000] microcode: microcode updated early to revision 0xd6, date = 2020-04-27
[ 0.000000] Linux version 5.4.0-48-generic (buildd@lcy01-amd64-023) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #52~18.04.1-Ubuntu SMP Thu Sep 10 12:50:22 UTC 2020 (Ubuntu 5.4.0-48.52~18.04.1-generic 5.4.60)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic root=UUID=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000072b5efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000072b5f000-0x0000000072b5ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000072b60000-0x000000007a57dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a57e000-0x000000007a5bcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007a5bd000-0x000000007aef9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007aefa000-0x000000007b4fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b500000-0x000000007b5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Inspiron 5567/02YHJP, BIOS 1.2.6 07/09/2018
[ 0.000000] tsc: Detected 2700.000 MHz processor
[ 0.002259] tsc: Detected 2699.909 MHz TSC
[ 0.002259] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002260] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002266] last_pfn = 0x27f800 max_arch_pfn = 0x400000000
[ 0.002270] MTRR default type: write-back
[ 0.002270] MTRR fixed ranges enabled:
[ 0.002271] 00000-9FFFF write-back
[ 0.002272] A0000-BFFFF uncachable
[ 0.002273] C0000-FFFFF write-protect
[ 0.002274] MTRR variable ranges enabled:
[ 0.002275] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.002276] 1 base 007E000000 mask 7FFE000000 uncachable
[ 0.002277] 2 base 007D000000 mask 7FFF000000 uncachable
[ 0.002277] 3 disabled
[ 0.002278] 4 disabled
[ 0.002278] 5 disabled
[ 0.002279] 6 disabled
[ 0.002279] 7 disabled
[ 0.002280] 8 disabled
[ 0.002280] 9 disabled
[ 0.002798] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003012] last_pfn = 0x72b5f max_arch_pfn = 0x400000000
[ 0.011416] found SMP MP-table at [mem 0x000fce00-0x000fce0f]
[ 0.011484] check: Scanning 1 areas for low memory corruption
[ 0.011488] Using GB pages for direct mapping
[ 0.011691] RAMDISK: [mem 0x3320b000-0x358fcfff]
[ 0.011706] ACPI: Early table checksum verification disabled
[ 0.011708] ACPI: RSDP 0x00000000000EB640 000024 (v02 DELL )
[ 0.011712] ACPI: XSDT 0x000000007A58A0B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.011717] ACPI: FACP 0x000000007A5ADA70 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.011722] ACPI: DSDT 0x000000007A58A230 023839 (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.011725] ACPI: FACS 0x000000007AEF2F80 000040
[ 0.011727] ACPI: APIC 0x000000007A5ADB80 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.011730] ACPI: FPDT 0x000000007A5ADC08 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.011732] ACPI: FIDT 0x000000007A5ADC50 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.011734] ACPI: MCFG 0x000000007A5ADCF0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.011737] ACPI: HPET 0x000000007A5ADD30 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.011739] ACPI: SSDT 0x000000007A5ADD68 000322 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.011742] ACPI: BOOT 0x000000007A5AE090 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.011745] ACPI: SSDT 0x000000007A5AE0B8 0012DC (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.011747] ACPI: HPET 0x000000007A5AF398 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.011750] ACPI: SSDT 0x000000007A5AF3D0 0006B5 (v02 INTEL xh_OEMBD 00000000 INTL 20160422)
[ 0.011752] ACPI: UEFI 0x000000007A5AFA88 000042 (v01 00000000 00000000)
[ 0.011755] ACPI: SSDT 0x000000007A5AFAD0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.011758] ACPI: LPIT 0x000000007A5B09B0 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.011760] ACPI: WSMT 0x000000007A5B0A48 000028 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.011762] ACPI: SSDT 0x000000007A5B0A70 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.011765] ACPI: SSDT 0x000000007A5B0D10 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.011768] ACPI: DBGP 0x000000007A5B3D18 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.011770] ACPI: DBG2 0x000000007A5B3D50 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.011773] ACPI: SSDT 0x000000007A5B3DA8 005700 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.011775] ACPI: SSDT 0x000000007A5B94A8 000281 (v02 SgRef SgUlt 00001000 INTL 20160422)
[ 0.011778] ACPI: SSDT 0x000000007A5B9730 000699 (v02 SgRef SgPch 00001000 INTL 20160422)
[ 0.011780] ACPI: DMAR 0x000000007A5B9DD0 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.011783] ACPI: TPM2 0x000000007A5B9EC0 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.011785] ACPI: SSDT 0x000000007A5B9EF8 0011AA (v01 AmdRef AmdTabl 00001000 INTL 20160422)
[ 0.011795] ACPI: Local APIC address 0xfee00000
[ 0.011989] No NUMA configuration found
[ 0.011990] Faking a node at [mem 0x0000000000000000-0x000000027f7fffff]
[ 0.011998] NODE_DATA(0) allocated [mem 0x27f7d3000-0x27f7fdfff]
[ 0.012189] Zone ranges:
[ 0.012190] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012191] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012192] Normal [mem 0x0000000100000000-0x000000027f7fffff]
[ 0.012193] Device empty
[ 0.012194] Movable zone start for each node
[ 0.012197] Early memory node ranges
[ 0.012198] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.012198] node 0: [mem 0x0000000000100000-0x0000000072b5efff]
[ 0.012199] node 0: [mem 0x0000000100000000-0x000000027f7fffff]
[ 0.012386] Zeroed struct page in unavailable ranges: 23814 pages
[ 0.012387] Initmem setup node 0 [mem 0x0000000000001000-0x000000027f7fffff]
[ 0.012388] On node 0 totalpages: 2040570
[ 0.012389] DMA zone: 64 pages used for memmap
[ 0.012390] DMA zone: 21 pages reserved
[ 0.012391] DMA zone: 3995 pages, LIFO batch:0
[ 0.012444] DMA32 zone: 7278 pages used for memmap
[ 0.012444] DMA32 zone: 465759 pages, LIFO batch:63
[ 0.021091] Normal zone: 24544 pages used for memmap
[ 0.021092] Normal zone: 1570816 pages, LIFO batch:63
[ 0.040705] Reserving Intel graphics memory at [mem 0x7d800000-0x7f7fffff]
[ 0.040963] ACPI: PM-Timer IO Port: 0x1808
[ 0.040964] ACPI: Local APIC address 0xfee00000
[ 0.040970] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.040971] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.040971] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.040972] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.041005] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.041006] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.041008] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.041009] ACPI: IRQ0 used by override.
[ 0.041010] ACPI: IRQ9 used by override.
[ 0.041012] Using ACPI (MADT) for SMP configuration information
[ 0.041013] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.041016] TSC deadline timer available
[ 0.041017] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.041030] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.041032] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.041032] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.041033] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.041033] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.041035] PM: Registered nosave memory: [mem 0x72b5f000-0x72b5ffff]
[ 0.041035] PM: Registered nosave memory: [mem 0x72b60000-0x7a57dfff]
[ 0.041036] PM: Registered nosave memory: [mem 0x7a57e000-0x7a5bcfff]
[ 0.041036] PM: Registered nosave memory: [mem 0x7a5bd000-0x7aef9fff]
[ 0.041037] PM: Registered nosave memory: [mem 0x7aefa000-0x7b4fefff]
[ 0.041037] PM: Registered nosave memory: [mem 0x7b4ff000-0x7b4fffff]
[ 0.041038] PM: Registered nosave memory: [mem 0x7b500000-0x7b5fffff]
[ 0.041038] PM: Registered nosave memory: [mem 0x7b600000-0x7d7fffff]
[ 0.041039] PM: Registered nosave memory: [mem 0x7d800000-0x7f7fffff]
[ 0.041039] PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff]
[ 0.041040] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.041040] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.041041] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.041041] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.041042] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.041042] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.041043] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.041043] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.041044] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.041048] [mem 0x7f800000-0xdfffffff] available for PCI devices
[ 0.041049] Booting paravirtualized kernel on bare hardware
[ 0.041052] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.041057] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.041230] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.041235] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.041236] pcpu-alloc: [0] 0 1 2 3
[ 0.041259] Built 1 zonelists, mobility grouping on. Total pages: 2008663
[ 0.041259] Policy zone: Normal
[ 0.041261] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic root=UUID=bfa8825e-c408-4084-a919-51ff18e208c1 ro quiet splash vt.handoff=1
[ 0.041855] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.042141] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.042189] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.046615] Calgary: detecting Calgary via BIOS EBDA area
[ 0.046617] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.072758] Memory: 7881164K/8162280K available (14339K kernel code, 2379K rwdata, 4928K rodata, 2704K init, 5020K bss, 281116K reserved, 0K cma-reserved)
[ 0.072764] random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
[ 0.072904] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.072919] Kernel/User page tables isolation: enabled
[ 0.072932] ftrace: allocating 44229 entries in 173 pages
[ 0.091850] rcu: Hierarchical RCU implementation.
[ 0.091852] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.091852] Tasks RCU enabled.
[ 0.091853] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.091854] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.094703] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.095260] random: crng done (trusting CPU's manufacturer)
[ 0.095304] spurious 8259A interrupt: IRQ7.
[ 0.095323] vt handoff: transparent VT on vt#1
[ 0.095330] Console: colour dummy device 80x25
[ 0.095334] printk: console [tty0] enabled
[ 0.095354] ACPI: Core revision 20190816
[ 0.095650] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.095764] APIC: Switch to symmetric I/O mode setup
[ 0.095766] DMAR: Host address width 39
[ 0.095767] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.095772] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.095773] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.095776] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.095777] DMAR: RMRR base: 0x0000007a2cf000 end: 0x0000007a2eefff
[ 0.095778] DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff
[ 0.095779] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.095780] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.095781] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.095782] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.095782] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.097508] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.097509] x2apic enabled
[ 0.097522] Switched APIC routing to cluster x2apic.
[ 0.101537] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.119804] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26eae8729ef, max_idle_ns: 440795235156 ns
[ 0.119808] Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.81 BogoMIPS (lpj=10799636)
[ 0.119810] pid_max: default: 32768 minimum: 301
[ 0.119848] LSM: Security Framework initializing
[ 0.119857] Yama: becoming mindful.
[ 0.119886] AppArmor: AppArmor initialized
[ 0.119935] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.119953] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.119968] *** VALIDATE tmpfs ***
[ 0.120115] *** VALIDATE proc ***
[ 0.120161] *** VALIDATE cgroup1 ***
[ 0.120163] *** VALIDATE cgroup2 ***
[ 0.120235] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.120251] process: using mwait in idle threads
[ 0.120254] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.120254] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.120257] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.120258] Spectre V2 : Mitigation: Full generic retpoline
[ 0.120259] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.120259] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.120260] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.120261] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.120262] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.120268] SRBDS: Mitigation: Microcode
[ 0.120268] MDS: Mitigation: Clear CPU buffers
[ 0.120533] Freeing SMP alternatives memory: 40K
[ 0.123893] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.123989] mce: [Hardware Error]: Machine check events logged
[ 0.123990] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 6: ee2000000040110a
[ 0.123992] mce: [Hardware Error]: TSC 0 ADDR fef1ce80 MISC 43880014086
[ 0.123995] mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1602153627 SOCKET 0 APIC 0 microcode d6
[ 0.123996] mce: [Hardware Error]: Machine check events logged
[ 0.123997] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee2000000040110a
[ 0.123998] mce: [Hardware Error]: TSC 0 ADDR fef1ce40 MISC 7880014086
[ 0.124000] mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1602153627 SOCKET 0 APIC 0 microcode d6
[ 0.124052] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.124057] ... version: 4
[ 0.124058] ... bit width: 48
[ 0.124058] ... generic registers: 4
[ 0.124059] ... value mask: 0000ffffffffffff
[ 0.124059] ... max period: 00007fffffffffff
[ 0.124060] ... fixed-purpose events: 3
[ 0.124060] ... event mask: 000000070000000f
[ 0.124101] rcu: Hierarchical SRCU implementation.
[ 0.125084] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.125137] smp: Bringing up secondary CPUs ...
[ 0.125220] x86: Booting SMP configuration:
[ 0.125221] .... node #0, CPUs: #1 #2
[ 0.128326] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.128326] #3
[ 0.128332] smp: Brought up 1 node, 4 CPUs
[ 0.128332] smpboot: Max logical packages: 1
[ 0.128332] smpboot: Total of 4 processors activated (21599.27 BogoMIPS)
[ 0.129513] devtmpfs: initialized
[ 0.129513] x86/mm: Memory block size: 128MB
[ 0.129513] PM: Registering ACPI NVS region [mem 0x72b5f000-0x72b5ffff] (4096 bytes)
[ 0.129513] PM: Registering ACPI NVS region [mem 0x7a5bd000-0x7aef9fff] (9687040 bytes)
[ 0.131853] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.131853] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.131906] pinctrl core: initialized pinctrl subsystem
[ 0.132068] PM: RTC time: 10:40:27, date: 2020-10-08
[ 0.132181] NET: Registered protocol family 16
[ 0.132272] audit: initializing netlink subsys (disabled)
[ 0.132278] audit: type=2000 audit(1602153627.036:1): state=initialized audit_enabled=0 res=1
[ 0.132278] EISA bus registered
[ 0.132278] cpuidle: using governor ladder
[ 0.132278] cpuidle: using governor menu
[ 0.132278] Simple Boot Flag at 0x47 set to 0x80
[ 0.132278] ACPI: bus type PCI registered
[ 0.132278] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.132278] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.132278] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.132278] PCI: Using configuration type 1 for base access
[ 0.132320] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.133265] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.133265] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.133265] ACPI: Added _OSI(Module Device)
[ 0.133265] ACPI: Added _OSI(Processor Device)
[ 0.133265] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.133265] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.133265] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.133265] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.133265] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.182029] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.185663] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.194359] ACPI: Dynamic OEM Table Load:
[ 0.194366] ACPI: SSDT 0xFFFF93D175EB8000 0006B4 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.196237] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.197520] ACPI: Dynamic OEM Table Load:
[ 0.197526] ACPI: SSDT 0xFFFF93D175B59400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.199683] ACPI: Dynamic OEM Table Load:
[ 0.199689] ACPI: SSDT 0xFFFF93D175EBA800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.201877] ACPI: Dynamic OEM Table Load:
[ 0.201881] ACPI: SSDT 0xFFFF93D175919800 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.205328] ACPI: EC: EC started
[ 0.205329] ACPI: EC: interrupt blocked
[ 0.207899] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.207901] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x45, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.207902] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.207902] ACPI: Interpreter enabled
[ 0.207950] ACPI: (supports S0 S3 S4 S5)
[ 0.207951] ACPI: Using IOAPIC for interrupt routing
[ 0.207998] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.208818] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.213032] ACPI: Power Resource [WRST] (on)
[ 0.213498] ACPI: Power Resource [WRST] (on)
[ 0.213965] ACPI: Power Resource [WRST] (on)
[ 0.214433] ACPI: Power Resource [WRST] (on)
[ 0.214907] ACPI: Power Resource [WRST] (on)
[ 0.214972] ACPI: Power Resource [PC09] (on)
[ 0.216527] ACPI: Power Resource [WRST] (on)
[ 0.216989] ACPI: Power Resource [WRST] (on)
[ 0.217451] ACPI: Power Resource [WRST] (on)
[ 0.218204] ACPI: Power Resource [WRST] (on)
[ 0.218689] ACPI: Power Resource [WRST] (on)
[ 0.219153] ACPI: Power Resource [WRST] (on)
[ 0.219619] ACPI: Power Resource [WRST] (on)
[ 0.220079] ACPI: Power Resource [WRST] (on)
[ 0.220546] ACPI: Power Resource [WRST] (on)
[ 0.221006] ACPI: Power Resource [WRST] (on)
[ 0.221466] ACPI: Power Resource [WRST] (on)
[ 0.223200] ACPI: Power Resource [WRST] (on)
[ 0.223660] ACPI: Power Resource [WRST] (on)
[ 0.224121] ACPI: Power Resource [WRST] (on)
[ 0.241908] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.241914] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.244069] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.245100] PCI host bridge to bus 0000:00
[ 0.245102] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.245103] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.245104] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.245105] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff window]
[ 0.245106] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.245107] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.245119] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.245286] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 0.245297] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[ 0.245303] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.245307] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.245496] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.245509] pci 0000:00:04.0: reg 0x10: [mem 0xdf320000-0xdf327fff 64bit]
[ 0.245772] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.245796] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[ 0.245873] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.246153] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.246176] pci 0000:00:14.2: reg 0x10: [mem 0xdf338000-0xdf338fff 64bit]
[ 0.246470] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.246736] pci 0000:00:15.0: reg 0x10: [mem 0xdf337000-0xdf337fff 64bit]
[ 0.247833] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.248097] pci 0000:00:15.1: reg 0x10: [mem 0xdf336000-0xdf336fff 64bit]
[ 0.249138] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.249166] pci 0000:00:16.0: reg 0x10: [mem 0xdf335000-0xdf335fff 64bit]
[ 0.249250] pci 0000:00:16.0: PME# supported from D3hot
[ 0.249454] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.249474] pci 0000:00:17.0: reg 0x10: [mem 0xdf330000-0xdf331fff]
[ 0.249481] pci 0000:00:17.0: reg 0x14: [mem 0xdf334000-0xdf3340ff]
[ 0.249489] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.249497] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.249505] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.249513] pci 0000:00:17.0: reg 0x24: [mem 0xdf333000-0xdf3337ff]
[ 0.249562] pci 0000:00:17.0: PME# supported from D3hot
[ 0.249765] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.249859] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.250112] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.250203] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.250445] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.250536] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.250789] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[ 0.251086] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.251103] pci 0000:00:1f.2: reg 0x10: [mem 0xdf32c000-0xdf32ffff]
[ 0.251341] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.251371] pci 0000:00:1f.3: reg 0x10: [mem 0xdf328000-0xdf32bfff 64bit]
[ 0.251406] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[ 0.251464] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.251733] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.251794] pci 0000:00:1f.4: reg 0x10: [mem 0xdf332000-0xdf3320ff 64bit]
[ 0.251864] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.252206] pci 0000:01:00.0: [1002:6900] type 00 class 0x038000
[ 0.252258] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.252280] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.252294] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.252308] pci 0000:01:00.0: reg 0x24: [mem 0xdf200000-0xdf23ffff]
[ 0.252322] pci 0000:01:00.0: reg 0x30: [mem 0xdf240000-0xdf25ffff pref]
[ 0.252333] pci 0000:01:00.0: enabling Extended Tags
[ 0.252461] pci 0000:01:00.0: supports D1 D2
[ 0.252532] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8 GT/s x4 link at 0000:00:1c.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[ 0.252646] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.252649] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.252651] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.252656] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.252928] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[ 0.253030] pci 0000:02:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
[ 0.253430] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.254085] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.254093] pci 0000:00:1c.4: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.254184] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.254223] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.254255] pci 0000:03:00.0: reg 0x18: [mem 0xdf000000-0xdf000fff 64bit]
[ 0.254277] pci 0000:03:00.0: reg 0x20: [mem 0xd0300000-0xd0303fff 64bit pref]
[ 0.254408] pci 0000:03:00.0: supports D1 D2
[ 0.254409] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254645] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.254652] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.254654] pci 0000:00:1c.5: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.254658] pci 0000:00:1c.5: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
[ 0.257729] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.257814] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.257898] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.257981] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.258064] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.258146] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.258228] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.258311] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.260337] ACPI: EC: interrupt unblocked
[ 0.260337] ACPI: EC: event unblocked
[ 0.260337] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x45, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.260337] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
[ 0.260337] iommu: Default domain type: Translated
[ 0.260337] SCSI subsystem initialized
[ 0.260337] libata version 3.00 loaded.
[ 0.260337] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.260337] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.260337] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.260337] vgaarb: loaded
[ 0.260337] ACPI: bus type USB registered
[ 0.260337] usbcore: registered new interface driver usbfs
[ 0.260337] usbcore: registered new interface driver hub
[ 0.260337] usbcore: registered new device driver usb
[ 0.260337] pps_core: LinuxPPS API ver. 1 registered
[ 0.260337] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.260337] PTP clock support registered
[ 0.260337] EDAC MC: Ver: 3.0.0
[ 0.260337] PCI: Using ACPI for IRQ routing
[ 0.291913] PCI: pci_cache_line_size set to 64 bytes
[ 0.292305] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.292307] e820: reserve RAM buffer [mem 0x72b5f000-0x73ffffff]
[ 0.292307] e820: reserve RAM buffer [mem 0x27f800000-0x27fffffff]
[ 0.292402] NetLabel: Initializing
[ 0.292403] NetLabel: domain hash size = 128
[ 0.292403] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.292417] NetLabel: unlabeled traffic allowed by default
[ 0.292440] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.292443] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.295812] clocksource: Switched to clocksource tsc-early
[ 0.307311] *** VALIDATE bpf ***
[ 0.307374] VFS: Disk quotas dquot_6.6.0
[ 0.307389] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.307414] *** VALIDATE ramfs ***
[ 0.307417] *** VALIDATE hugetlbfs ***
[ 0.307491] AppArmor: AppArmor Filesystem Enabled
[ 0.307518] pnp: PnP ACPI init
[ 0.307870] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.307871] system 00:00: [io 0xffff] has been reserved
[ 0.307872] system 00:00: [io 0xffff] has been reserved
[ 0.307873] system 00:00: [io 0xffff] has been reserved
[ 0.307875] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.307876] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.307880] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.307999] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.308044] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.308047] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.308422] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.308441] pnp 00:04: Plug and Play ACPI device, IDs DLL0767 PNP0f13 (active)
[ 0.308747] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.308748] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.308749] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.308750] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.308751] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.308753] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.308754] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.308755] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.308756] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.308758] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.308761] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.308810] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.308811] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.308812] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.308814] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.308815] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.308816] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.308817] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.308820] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.309188] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.309191] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310606] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.310608] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.310611] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.313210] pnp: PnP ACPI: found 9 devices
[ 0.314363] thermal_sys: Registered thermal governor 'fair_share'
[ 0.314364] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.314364] thermal_sys: Registered thermal governor 'step_wise'
[ 0.314365] thermal_sys: Registered thermal governor 'user_space'
[ 0.314366] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.318865] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.318900] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.318908] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.318911] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.318914] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.318918] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.318922] pci 0000:00:1c.4: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.318928] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.318929] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.318932] pci 0000:00:1c.5: bridge window [mem 0xdf000000-0xdf0fffff]
[ 0.318935] pci 0000:00:1c.5: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
[ 0.318940] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.318941] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.318942] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.318943] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xdfffffff window]
[ 0.318944] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.318945] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.318946] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.318947] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.318948] pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.318949] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.318950] pci_bus 0000:03: resource 1 [mem 0xdf000000-0xdf0fffff]
[ 0.318951] pci_bus 0000:03: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref]
[ 0.319144] NET: Registered protocol family 2
[ 0.319281] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.319320] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.319446] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.319532] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.319561] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.319584] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.319636] NET: Registered protocol family 1
[ 0.319640] NET: Registered protocol family 44
[ 0.319653] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.332764] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x6b0 took 12793 usecs
[ 0.332825] pci 0000:01:00.0: disabling ATS
[ 0.332977] PCI: CLS 0 bytes, default 64
[ 0.333015] Trying to unpack rootfs image as initramfs...
[ 0.937809] Freeing initrd memory: 39880K
[ 0.937910] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:15.0
[ 0.937913] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:15.1
[ 0.951872] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.951873] software IO TLB: mapped [mem 0x6eb5f000-0x72b5f000] (64MB)
[ 0.952095] check: Scanning for low memory corruption every 60 seconds
[ 0.952492] Initialise system trusted keyrings
[ 0.952516] Key type blacklist registered
[ 0.952547] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.953787] zbud: loaded
[ 0.954136] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.954282] fuse: init (API version 7.31)
[ 0.954296] *** VALIDATE fuse ***
[ 0.954298] *** VALIDATE fuse ***
[ 0.954385] Platform Keyring initialized
[ 0.957853] Key type asymmetric registered
[ 0.957854] Asymmetric key parser 'x509' registered
[ 0.957861] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.957893] io scheduler mq-deadline registered
[ 0.958252] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ 0.958328] pcieport 0000:00:1c.0: AER: enabled with IRQ 122
[ 0.958594] pcieport 0000:00:1c.4: PME: Signaling with IRQ 123
[ 0.958651] pcieport 0000:00:1c.4: AER: enabled with IRQ 123
[ 0.958890] pcieport 0000:00:1c.5: PME: Signaling with IRQ 124
[ 0.958941] pcieport 0000:00:1c.5: AER: enabled with IRQ 124
[ 0.959012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.959063] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.959063] vesafb: scrolling: redraw
[ 0.959064] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.959077] vesafb: framebuffer at 0xb0000000, mapped to 0x000000005ec87dab, using 8128k, total 8128k
[ 0.959110] fbcon: Deferring console take-over
[ 0.959111] fb0: VESA VGA frame buffer device
[ 0.959123] intel_idle: MWAIT substates: 0x11142120
[ 0.959124] intel_idle: v0.4.1 model 0x8E
[ 0.959341] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.960158] ACPI: AC Adapter [AC] (on-line)
[ 0.960226] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.960259] ACPI: Lid Switch [LID0]
[ 0.960285] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.960306] ACPI: Power Button [PBTN]
[ 0.960329] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.960342] ACPI: Sleep Button [SBTN]
[ 0.960367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.960385] ACPI: Power Button [PWRF]
[ 0.962521] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.962522] ACPI: Thermal Zone [THM] (25 C)
[ 0.962656] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.964590] Linux agpgart interface v0.103
[ 0.967847] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 0.967858] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 0.988888] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.030600] loop: module loaded
[ 1.030839] libphy: Fixed MDIO Bus: probed
[ 1.030840] tun: Universal TUN/TAP device driver, 1.6
[ 1.030899] PPP generic driver version 2.4.2
[ 1.031021] VFIO - User Level meta-driver version: 0.3
[ 1.031105] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.031107] ehci-pci: EHCI PCI platform driver
[ 1.031118] ehci-platform: EHCI generic platform driver
[ 1.031129] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.031130] ohci-pci: OHCI PCI platform driver
[ 1.031137] ohci-platform: OHCI generic platform driver
[ 1.031144] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.031366] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.031370] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.032464] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 1.032695] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.032881] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.032882] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.032883] usb usb1: Product: xHCI Host Controller
[ 1.032884] usb usb1: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[ 1.032885] usb usb1: SerialNumber: 0000:00:14.0
[ 1.033002] hub 1-0:1.0: USB hub found
[ 1.033021] hub 1-0:1.0: 12 ports detected
[ 1.034371] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.034374] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.034376] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.034414] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.034415] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.034416] usb usb2: Product: xHCI Host Controller
[ 1.034417] usb usb2: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[ 1.034418] usb usb2: SerialNumber: 0000:00:14.0
[ 1.034526] hub 2-0:1.0: USB hub found
[ 1.034541] hub 2-0:1.0: 6 ports detected
[ 1.035252] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.035640] i8042: Warning: Keylock active
[ 1.037173] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.037177] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.037332] mousedev: PS/2 mouse device common for all mice
[ 1.037707] rtc_cmos 00:01: RTC can wake from S4
[ 1.038311] rtc_cmos 00:01: registered as rtc0
[ 1.038322] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.038328] i2c /dev entries driver
[ 1.038368] device-mapper: uevent: version 1.0.3
[ 1.038416] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 1.038432] platform eisa.0: Probing EISA bus 0
[ 1.038433] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.038434] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.038435] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.038436] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.038437] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.038438] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.038438] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.038439] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.038440] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.038441] platform eisa.0: EISA: Detected 0 cards
[ 1.038444] intel_pstate: Intel P-state driver initializing
[ 1.038675] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.038935] intel_pstate: HWP enabled
[ 1.038959] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.038999] intel_pmc_core INT33A1:00: initialized
[ 1.039057] drop_monitor: Initializing network drop monitor service
[ 1.039182] NET: Registered protocol family 10
[ 1.042458] Segment Routing with IPv6
[ 1.042477] NET: Registered protocol family 17
[ 1.042515] Key type dns_resolver registered
[ 1.042757] RAS: Correctable Errors collector initialized.
[ 1.042780] microcode: sig=0x806e9, pf=0x80, revision=0xd6
[ 1.042809] microcode: Microcode Update Driver: v2.2.
[ 1.042824] IPI shorthand broadcast: enabled
[ 1.042833] sched_clock: Marking stable (1042018182, 788618)->(1044560664, -1753864)
[ 1.042891] registered taskstats version 1
[ 1.042898] Loading compiled-in X.509 certificates
[ 1.043505] Loaded X.509 cert 'Build time autogenerated kernel key: 59a6f4fdc5599d4ba313e816491c745e50e7fa8e'
[ 1.043524] zswap: loaded using pool lzo/zbud
[ 1.043567] Key type ._fscrypt registered
[ 1.043568] Key type .fscrypt registered
[ 1.046521] Key type big_key registered
[ 1.046524] Key type trusted registered
[ 1.047951] Key type encrypted registered
[ 1.047954] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.047964] ima: Allocated hash algorithm: sha1
[ 1.172310] ima: No architecture policies found
[ 1.172325] evm: Initialising EVM extended attributes:
[ 1.172325] evm: security.selinux
[ 1.172326] evm: security.SMACK64
[ 1.172326] evm: security.SMACK64EXEC
[ 1.172326] evm: security.SMACK64TRANSMUTE
[ 1.172327] evm: security.SMACK64MMAP
[ 1.172327] evm: security.apparmor
[ 1.172327] evm: security.ima
[ 1.172328] evm: security.capability
[ 1.172328] evm: HMAC attrs: 0x1
[ 1.173446] PM: Magic number: 8:816:678
[ 1.173651] rtc_cmos 00:01: setting system clock to 2020-10-08T10:40:28 UTC (1602153628)
[ 1.174466] Freeing unused decrypted memory: 2040K
[ 1.174799] Freeing unused kernel image memory: 2704K
[ 1.174856] Write protecting the kernel read-only data: 22528k
[ 1.175284] Freeing unused kernel image memory: 2008K
[ 1.175517] Freeing unused kernel image memory: 1216K
[ 1.182892] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.182893] x86/mm: Checking user space page tables
[ 1.190120] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.190122] Run /init as init process
[ 1.286064] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.304204] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 1.306568] ahci 0000:00:17.0: version 3.0
[ 1.306868] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[ 1.306937] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.306939] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 1.307415] scsi host0: ahci
[ 1.307566] scsi host1: ahci
[ 1.307628] ata1: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333100 irq 126
[ 1.307630] ata2: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333180 irq 126
[ 1.308505] libphy: r8169: probed
[ 1.308949] r8169 0000:03:00.0 eth0: RTL8106e, 18:db:f2:48:5c:72, XID 449, IRQ 127
[ 1.333070] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.364088] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.389635] usb 2-2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.24
[ 1.389636] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.389637] usb 2-2: Product: USB3.0 Hub
[ 1.389638] usb 2-2: Manufacturer: GenesysLogic
[ 1.391113] hub 2-2:1.0: USB hub found
[ 1.391460] hub 2-2:1.0: 4 ports detected
[ 1.515909] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 1.623931] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.624361] ata1.00: ATA-11: Patriot Burst, SBFM61.3, max UDMA/133
[ 1.624362] ata1.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.624813] ata1.00: configured for UDMA/133
[ 1.635152] scsi 0:0:0:0: Direct-Access ATA Patriot Burst 61.3 PQ: 0 ANSI: 5
[ 1.635317] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.635449] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 1.635463] sd 0:0:0:0: [sda] Write Protect is off
[ 1.635465] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.635486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.652802] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.653148] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.674532] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
[ 1.674534] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.674535] usb 1-2: Product: USB2.0 Hub
[ 1.674536] usb 1-2: Manufacturer: GenesysLogic
[ 1.675821] hub 1-2:1.0: USB hub found
[ 1.676619] hub 1-2:1.0: 4 ports detected
[ 1.807886] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 1.951923] tsc: Refined TSC clocksource calibration: 2711.986 MHz
[ 1.951930] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27177920435, max_idle_ns: 440795246844 ns
[ 1.951966] clocksource: Switched to clocksource tsc
[ 1.951990] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.954687] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
[ 1.957979] usb 1-3: New USB device found, idVendor=174c, idProduct=1153, bcdDevice= 0.01
[ 1.957980] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.957981] usb 1-3: Product: AS2115
[ 1.957982] usb 1-3: Manufacturer: ASMedia
[ 1.957983] usb 1-3: SerialNumber: 00000000000000000000
[ 1.958059] ata2.00: configured for UDMA/100
[ 1.962324] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A1C1 PQ: 0 ANSI: 5
[ 2.021718] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.021720] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.035910] usb 1-2.1: new low-speed USB device number 4 using xhci_hcd
[ 2.036099] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.036230] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.037366] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4648]
[ 2.064440] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..]
[ 2.064449] psmouse serio1: synaptics: Your touchpad (PNP: DLL0767 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 2.116517] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3240, fw id: 2374689
[ 2.140122] usb 1-2.1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 2.140123] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.140124] usb 1-2.1: Product: USB Optical Mouse
[ 2.140125] usb 1-2.1: Manufacturer: PixArt
[ 2.151414] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.263911] usb 1-5: new high-speed USB device number 5 using xhci_hcd
[ 2.427723] usb 1-5: New USB device found, idVendor=0c45, idProduct=6a06, bcdDevice=64.26
[ 2.427725] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.427726] usb 1-5: Product: Integrated_Webcam_HD
[ 2.427727] usb 1-5: Manufacturer: 1234567890-1082
[ 2.491922] usb 1-2.3: new full-speed USB device number 6 using xhci_hcd
[ 2.631588] usb 1-2.3: New USB device found, idVendor=0451, idProduct=1020, bcdDevice=42.16
[ 2.631590] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.631591] usb 1-2.3: Product: K1000A
[ 2.631592] usb 1-2.3: Manufacturer: Ā낭Welltech Computer
[ 2.719916] usb 1-6: new high-speed USB device number 7 using xhci_hcd
[ 2.868453] usb 1-6: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 2.868454] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.868455] usb 1-6: Product: USB2.0-CRW
[ 2.868456] usb 1-6: Manufacturer: Generic
[ 2.868457] usb 1-6: SerialNumber: 20100201396000000
[ 2.995912] usb 1-8: new full-speed USB device number 8 using xhci_hcd
[ 3.145512] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 3.145514] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.153688] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 3.154496] scsi host2: usb-storage 1-3:1.0
[ 3.154638] usbcore: registered new interface driver usb-storage
[ 3.155644] usbcore: registered new interface driver uas
[ 3.155818] usbcore: registered new interface driver rtsx_usb
[ 3.176609] usbcore: registered new interface driver usbhid
[ 3.176610] usbhid: USB HID core driver
[ 3.179708] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:093A:2510.0001/input/input7
[ 3.179807] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.1/input0
[ 3.179906] input: Ā낭Welltech Computer K1000A as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.3/0003:0451:1020.0002/input/input8
[ 3.240128] hid-generic 0003:0451:1020.0002: input,hidraw1: USB HID v1.00 Device [Ā낭Welltech Computer K1000A] on usb-0000:00:14.0-2.3/input3
[ 3.276977] fbcon: Taking over console
[ 3.277069] Console: switching to colour frame buffer device 240x67
[ 3.436745] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 3.599657] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.616124] systemd[1]: Detected architecture x86-64.
[ 3.637728] systemd[1]: Set hostname to <Android-x86349456>.
[ 3.838427] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.838581] systemd[1]: Created slice User and Session Slice.
[ 3.838775] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.838787] systemd[1]: Reached target Remote File Systems.
[ 3.838893] systemd[1]: Created slice System Slice.
[ 3.838910] systemd[1]: Reached target Slices.
[ 3.838958] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.854807] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 3.871261] bpfilter: Loaded bpfilter_umh pid 338
[ 3.871586] Started bpfilter
[ 3.933817] systemd-journald[331]: Received request to flush runtime journal from PID 1
[ 3.934030] lp: driver loaded but no devices found
[ 3.938450] ppdev: user-space parallel port driver
[ 3.978678] systemd-journald[331]: File /var/log/journal/fd494dcb38ec4b49b9e0c2e48285f709/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 4.160522] scsi 2:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
[ 4.160661] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4.160885] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 4.161230] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.161231] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 4.161571] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.183665] sdb: sdb1
[ 4.184729] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 4.322180] input: DELL Wireless hotkeys as /devices/virtual/input/input9
[ 4.335222] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20190816/nsprepkg-96)
[ 4.440011] intel_rapl_common: Found RAPL domain package
[ 4.440013] intel_rapl_common: Found RAPL domain dram
[ 4.440110] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 4.504625] mc: Linux media interface: v0.10
[ 4.520775] videodev: Linux video capture interface: v2.00
[ 4.526298] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 4.526660] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 4.529027] Bluetooth: Core ver 2.22
[ 4.529040] NET: Registered protocol family 31
[ 4.529041] Bluetooth: HCI device and connection manager initialized
[ 4.529044] Bluetooth: HCI socket layer initialized
[ 4.529047] Bluetooth: L2CAP socket layer initialized
[ 4.529050] Bluetooth: SCO socket layer initialized
[ 4.540700] i2c_hid i2c-DELL0767:00: i2c-DELL0767:00 supply vdd not found, using dummy regulator
[ 4.540724] i2c_hid i2c-DELL0767:00: i2c-DELL0767:00 supply vddl not found, using dummy regulator
[ 4.567510] input: DELL0767:00 06CB:7E92 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0767:00/0018:06CB:7E92.0003/input/input10
[ 4.567601] input: DELL0767:00 06CB:7E92 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0767:00/0018:06CB:7E92.0003/input/input11
[ 4.567672] hid-generic 0018:06CB:7E92.0003: input,hidraw2: I2C HID v1.00 Mouse [DELL0767:00 06CB:7E92] on i2c-DELL0767:00
[ 4.573699] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 4.577684] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 4.578016] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 4.614718] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6a06)
[ 4.620544] usbcore: registered new interface driver btusb
[ 4.623206] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 4.623208] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 4.624869] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.625353] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.627707] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 4.627709] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[ 4.627711] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 4.627712] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.627774] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
[ 4.627851] usbcore: registered new interface driver uvcvideo
[ 4.627852] USB Video Class driver (1.1.1)
[ 4.632241] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[ 4.632243] fb0: switching to inteldrmfb from VESA VGA
[ 4.632552] Console: switching to colour dummy device 80x25
[ 4.632593] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 4.633897] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.633899] [drm] Driver supports precise vblank timestamp query.
[ 4.634527] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.638477] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 4.670389] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 4.672889] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 4.673784] Intel(R) Wireless WiFi driver for Linux
[ 4.673785] Copyright(c) 2003- 2015 Intel Corporation
[ 4.677407] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 4.741338] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.743208] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 4.744711] [drm] amdgpu kernel modesetting enabled.
[ 4.744732] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 4.744873] ATPX version 1, functions 0x00000033
[ 4.744992] ATPX Hybrid Graphics
[ 4.745652] CRAT table not found
[ 4.745655] Virtual CRAT table created for CPU
[ 4.745656] Parsing CRAT table with 1 nodes
[ 4.745657] Creating topology SYSFS entries
[ 4.745669] Topology: Add CPU node
[ 4.745669] Finished initializing topology
[ 4.745736] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xc0000000 -> 0xcfffffff
[ 4.745737] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xd0000000 -> 0xd01fffff
[ 4.745738] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xdf200000 -> 0xdf23ffff
[ 4.747102] [drm] initializing kernel modesetting (TOPAZ 0x1002:0x6900 0x1028:0x0767 0xC3).
[ 4.748122] [drm] register mmio base: 0xDF200000
[ 4.748123] [drm] register mmio size: 262144
[ 4.748125] [drm] PCIE atomic ops is not supported
[ 4.748131] [drm] add ip block number 0 <vi_common>
[ 4.748132] [drm] add ip block number 1 <gmc_v7_0>
[ 4.748132] [drm] add ip block number 2 <iceland_ih>
[ 4.748133] [drm] add ip block number 3 <gfx_v8_0>
[ 4.748134] [drm] add ip block number 4 <sdma_v2_4>
[ 4.748135] [drm] add ip block number 5 <powerplay>
[ 4.748140] amdgpu 0000:01:00.0: kfd not supported on this ASIC
[ 4.749859] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[ 4.754343] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[ 4.763012] usb 1-2.3: 1:1: cannot get freq at ep 0x1
[ 4.771738] fbcon: i915drmfb (fb0) is primary device
[ 4.771794] Console: switching to colour frame buffer device 240x67
[ 4.771893] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 4.772117] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.772339] usb 1-2.3: 2:1: cannot get freq at ep 0x82
[ 4.825014] ATOM BIOS: BR46858.006
[ 4.825053] vga_switcheroo: enabled
[ 4.825070] [drm] GPU posting now...
[ 4.829820] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 4.912924] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input15
[ 4.919556] amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[ 4.919559] amdgpu 0000:01:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[ 4.919916] [drm] Detected VRAM RAM=4096M, BAR=256M
[ 4.919917] [drm] RAM width 64bits GDDR5
[ 4.920008] [TTM] Zone kernel: Available graphics memory: 3964526 KiB
[ 4.920009] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 4.920010] [TTM] Initializing pool allocator
[ 4.920013] [TTM] Initializing DMA pool allocator
[ 4.920061] [drm] amdgpu: 4096M of VRAM memory ready
[ 4.920065] [drm] amdgpu: 4096M of GTT memory ready.
[ 4.920076] [drm] GART: num cpu pages 65536, num gpu pages 65536
[ 4.920672] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000).
[ 4.920746] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.920747] [drm] Driver supports precise vblank timestamp query.
[ 4.932527] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 4.932529] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.932529] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.932530] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.932530] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 4.932531] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 4.947477] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 4.962869] cryptd: max_cpu_qlen set to 1000
[ 4.964469] Bluetooth: hci0: Intel firmware patch completed and activated
[ 4.971840] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[ 4.976246] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.976247] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.976248] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.976249] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.976249] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.976250] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 4.976251] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 4.976252] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.997850] AVX2 version of gcm_enc/dec engaged.
[ 4.997852] AES CTR mode by8 optimization enabled
[ 4.998736] iwlwifi 0000:02:00.0: base HW address: 58:fb:84:df:82:75
[ 5.005798] usbcore: registered new interface driver snd-usb-audio
[ 5.025240] amdgpu: [powerplay] hwmgr_sw_init smu backed is iceland_smu
[ 5.062516] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 5.065715] thermal thermal_zone7: failed to read out thermal zone (-61)
[ 5.066506] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 5.066613] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 5.066964] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 5.067067] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 5.067263] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 5.067315] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 5.071620] amdgpu: [powerplay] can't get the mac of 5
[ 5.099496] [drm] Initialized amdgpu 3.35.0 20150101 for 0000:01:00.0 on minor 1
[ 5.357849] intel_rapl_common: Found RAPL domain package
[ 5.357851] intel_rapl_common: Found RAPL domain core
[ 5.357852] intel_rapl_common: Found RAPL domain uncore
[ 5.357853] intel_rapl_common: Found RAPL domain dram
[ 5.477722] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 5.546047] input: DELL0767:00 06CB:7E92 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0767:00/0018:06CB:7E92.0003/input/input22
[ 5.551598] input: DELL0767:00 06CB:7E92 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL0767:00/0018:06CB:7E92.0003/input/input23
[ 5.551788] hid-multitouch 0018:06CB:7E92.0003: input,hidraw2: I2C HID v1.00 Mouse [DELL0767:00 06CB:7E92] on i2c-DELL0767:00
[ 5.648579] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 5.828453] pktcdvd: pktcdvd0: writer mapped to sr0
[ 5.874156] Adding 7811068k swap on /dev/sda5. Priority:-2 extents:1 across:7811068k SSFS
[ 6.295930] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 6.358377] audit: type=1400 audit(1602153633.678:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1032 comm="apparmor_parser"
[ 6.358463] audit: type=1400 audit(1602153633.678:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1033 comm="apparmor_parser"
[ 6.358465] audit: type=1400 audit(1602153633.678:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1033 comm="apparmor_parser"
[ 6.358467] audit: type=1400 audit(1602153633.678:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1033 comm="apparmor_parser"
[ 6.361567] audit: type=1400 audit(1602153633.682:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1029 comm="apparmor_parser"
[ 6.361570] audit: type=1400 audit(1602153633.682:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1029 comm="apparmor_parser"
[ 6.361572] audit: type=1400 audit(1602153633.682:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1029 comm="apparmor_parser"
[ 6.361574] audit: type=1400 audit(1602153633.682:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1029 comm="apparmor_parser"
[ 6.366597] audit: type=1400 audit(1602153633.686:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1038 comm="apparmor_parser"
[ 6.374282] audit: type=1400 audit(1602153633.694:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1039 comm="apparmor_parser"
[ 6.657697] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.657698] Bluetooth: BNEP filters: protocol multicast
[ 6.657701] Bluetooth: BNEP socket layer initialized
[ 7.058944] RTL8208 Fast Ethernet r8169-300:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 7.136316] systemd-journald[331]: File /var/log/journal/fd494dcb38ec4b49b9e0c2e48285f709/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
[ 7.328762] r8169 0000:03:00.0 enp3s0: Link is Down
[ 8.748874] usb 1-2.3: 2:1: cannot get freq at ep 0x82
[ 9.133594] Bluetooth: RFCOMM TTY layer initialized
[ 9.133602] Bluetooth: RFCOMM socket layer initialized
[ 9.133606] Bluetooth: RFCOMM ver 1.11
[ 9.464239] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control off
[ 9.464248] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 10.359496] rfkill: input handler disabled
[ 11.175992] wlp2s0: authenticate with c4:6e:1f:eb:28:84
[ 11.191175] wlp2s0: send auth to c4:6e:1f:eb:28:84 (try 1/3)
[ 11.198770] wlp2s0: authenticated
[ 11.203849] wlp2s0: associate with c4:6e:1f:eb:28:84 (try 1/3)
[ 11.209527] wlp2s0: RX AssocResp from c4:6e:1f:eb:28:84 (capab=0x431 status=0 aid=5)
[ 11.221846] wlp2s0: associated
[ 11.304820] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 13.327467] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 13.500618] amdgpu: [powerplay] VI should always have 2 performance levels
[ 13.543454] amdgpu 0000:01:00.0: no suspend buffer for LTR; ASPM issues possible after resume
[ 13.543493] amdgpu 0000:01:00.0: GPU pci config reset
[ 13.543665] amdgpu 0000:01:00.0: no suspend buffer for LTR; ASPM issues possible after resume
[ 14.143001] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 14.756761] kauditd_printk_skb: 100 callbacks suppressed
[ 14.756763] audit: type=1107 audit(1602153642.078:112): pid=1253 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/UDisks2" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name=":1.3" pid=1919 label="snap.indicator-sensors.indicator-sensors" peer_pid=1215 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 15.690013] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:c4:6e:1f:eb:28:84:08:00 SRC=192.168.1.202 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[ 15.690689] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:a4:2b:b0:cd:da:59:08:00 SRC=192.168.15.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[ 15.692128] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:a4:2b:b0:cd:da:59:08:00 SRC=192.168.15.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[ 15.694110] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:a4:2b:b0:cd:da:59:08:00 SRC=192.168.15.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[ 15.695817] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:a4:2b:b0:cd:da:59:08:00 SRC=192.168.15.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[ 17.849147] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:a4:2b:b0:cd:da:59:08:00 SRC=192.168.15.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[ 17.852600] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:a4:2b:b0:cd:da:59:08:00 SRC=192.168.15.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[ 23.643359] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:9c:93:4e:19:b1:20:08:00 SRC=172.23.3.64 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=41033 PROTO=2
[ 24.769584] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:00:00:aa:f0:16:19:08:00 SRC=172.23.3.114 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=54918 PROTO=2
[ 24.769840] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:00:00:aa:f0:16:19:08:00 SRC=172.23.3.114 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=54918 PROTO=2
[ 31.614285] usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 31.632686] usb 2-1: New USB device found, idVendor=1f75, idProduct=0917, bcdDevice= 0.01
[ 31.632688] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 31.632689] usb 2-1: Product: USB DISK
[ 31.632690] usb 2-1: Manufacturer:
[ 31.632690] usb 2-1: SerialNumber: 15052844008107
[ 31.635060] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 31.635132] scsi host3: usb-storage 2-1:1.0
[ 31.691248] [UFW BLOCK] IN=enp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:9601:f9c7:c51d:a471 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=711936 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 31.691263] [UFW BLOCK] IN=enp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:9601:f9c7:c51d:a471 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=714842 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 31.691271] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3345:cf44:af4a:61b1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=415263 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 31.691282] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3345:cf44:af4a:61b1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=5083 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 31.701512] [UFW BLOCK] IN=enp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:9601:f9c7:c51d:a471 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=711936 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 31.701526] [UFW BLOCK] IN=enp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:9601:f9c7:c51d:a471 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=714842 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 31.701536] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3345:cf44:af4a:61b1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=415263 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 31.701548] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3345:cf44:af4a:61b1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=5083 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 32.640793] scsi 3:0:0:0: Direct-Access 1.00 PQ: 0 ANSI: 6
[ 32.641057] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 32.641360] sd 3:0:0:0: [sdc] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB)
[ 32.641485] sd 3:0:0:0: [sdc] Write Protect is off
[ 32.641488] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 32.641612] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 32.669340] sdc: sdc1
[ 32.670144] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 32.939657] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 37.054379] audit: type=1400 audit(1602153664.374:113): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/etc/ssl/openssl.cnf" pid=2714 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=122 ouid=0